Welcome to Scooter Parts R Us, your One Stop scooter parts store. You name it, we have it. We get our parts directly from the manufacture, so that you will get the best part for LESS.
|1||$135||47cc complete engine with transmission (gear box)||$15||$150|
|1||$175||47cc High Performance complete engine with transmission (gear box) - This is a modified 47cc engine with a big bore kit (our 49cc billet top high performance cylinder kit #3 which uses a 44mm piston (49cc piston), also came with an aluminum pull starter and aluminum starter claw, and performance air filter.||$20||$195|
|1||$39||47cc performance flywheel (9 fin)||$9||$48|
|1||$8||47cc intake manifold||$2||$10|
|1||$49||47cc performance crank shaft & connecting rod for 10mm piston pin||$10||$59|
|1||$49||47cc performance crank shaft & connecting rod for 12mm piston pin||$10||$59|
|1||$30||47cc stock crank shaft & connecting rod for 10mm piston pin||$10||$40|
|1||$30||47cc stock crank shaft & connecting rod for 12mm piston pin||$10||$40|
|1||$10||47cc crank shaft seal (pair)||$4||$14|
|1||$25||47cc ignition coil||$5||$30|
|1||$4||47cc spark plug||$2||$6|
|1||$5||47cc performance spark plug (NGK)||$2||$7|
|1||$6||47cc motor bracket||$4||$10|
|1||$7||47cc killer switch||$3||$10|
|1||$6||47cc rockit key - The Rockit Key is an off set key that you replace with the key found in your crankshaft. By installing the Rockit Key, it assures you that your timing is exactly advanced 10 degrees. Doing the advance timing gives more power to the engine, but doing it perfectly is almost impossible. The off set key assures that the flywheel will stay in place and is advanced at the exact degrees which the off set key is made.||$2||$8|
|1||$8||47cc heavy duty killer switch||$3||$11|
|1||$35||47cc/49cc engine case||$8||$43|
Rocket Key FAQ
Do They Work?
Timing Keys Or Rocket Keys Are Offset Keys Used To Move The Point Of Ignition A Few Degrees. The Ignition Point Is Determined By The Relationship Of The Coil And The Corresponding Trigger On The Flywheel
Where Do They Go?
They Are Inserted Into The Crank Shafts Keyway With The Offset Portion Positioned So That The Flywheel Is Moved (Rotated) In The Same Direction As The Engine Spins. For Example: If Your Engine Rotates In The Clockwise Direction Then The Timing Key Will Be Pointing Toward The Right
How Easy Are They To Install?
Fairly Easily With A Flywheel Puller. This Is Done By First Removing The Transmission And Clutch. The Flywheel Puller Is Then Used To Remove The Flywheel, The Original Key Is Removed And The New One Is Installed. The Parts Are Then Reinstalled In Reverse Order.
We use Paypal Shopping Cart
Contact Us at Sales@ScooterPartsRUs.com